Which Accessories Do You Need for a Prism Data Cabinet?
By In Touch Telecoms LtdShare
Start with the equipment you’re putting in the cabinet and how you’ll install it. A compact router may need a shelf, a bundle of patch leads may benefit from a cable manager, and several powered devices may need a rack-mounted power distribution unit (PDU). All the accessory types below are available through InTouchTel.com.
| Accessory | When you might need it | What to check |
|---|---|---|
| Rack shelf | To support a router, modem or other equipment without rack ears, where the equipment maker permits shelf mounting | Shelf depth, mounting points, load rating and room around the equipment’s vents |
| Cable tray or cable manager | To route cable bundles or organise patch leads near a switch or patch panel | Mounting position, tray size and space for cables to bend |
| Castors | For a compatible floor-standing cabinet that needs to be repositioned during installation | Cabinet compatibility and load rating of the castor set for the intended use |
| Plinth | To raise a compatible floor-standing cabinet and, where the design allows, bring cables in from below | Cabinet width and depth, cable-entry openings and added height |
| PDU | To distribute power to several devices inside the cabinet | Outlet types and count, mounting position, plug type and electrical rating |
| Earth bar (E-Bar) and bonding kit | Where the installation calls for an earth bar and cabinet bonding | Ask your installer to specify the arrangement and confirm which bonding kit to include with the E-Bar |
Mounting a DrayTek router in your cabinet
DrayTek offers a rack-mount kit that holds compatible Vigor routers securely in a standard 19-inch cabinet. Check the kit against your exact router model before ordering. If you’re requesting a cabinet quote, include the router model so we can check which kit fits.
Browse the DrayTek range at InTouchTel.com
Match the accessories to the exact cabinet
Find the cabinet’s model or part number before you order. Two cabinets with the same rack height can have different depths, mounting positions and base fittings. Check how the accessories fit together, too. For example, a shelf needs room for the equipment and its cables, and a vertical PDU needs enough clearance to plug devices in without obstructing access to their rear ports.
Request a quote for your Prism cabinet accessories
Send us the Prism cabinet model or part number, its rack height and dimensions if known, and a list of the equipment and accessories you need. If you’re still choosing the cabinet, tell us the available space and what you plan to install. We can quote for the cabinet and compatible accessories together, or for accessories for a Prism cabinet you already have.
Browse Prism cabinets and accessories · Read the Prism cabinet buying guide